Panasonic DC Digital Vacuum Sensor with -29.5 to +29.5 inHg (-14.50 to +14.50 psi, -100.0 to +100.0 kPa) pressure range, Multifunction type, PBT (glass fiber reinforced) enclosure, Acrylic LCD display, Body Size: 30W x 30H x 42.5D mm, 2x NPN, 1x Analog (1~5V) outputs, N.O./N.C. selectable, red/green/orange display, Pressure port: M5 female + 1/8" NPT male Thread, Repeatibility: within ±0.1% F.S. (within ±2 digits), Short Circuit Protected, IP40 (IEC) rating, CN-14A-C2 (connector with 2m cable) included..
Quantity in Stock
0
UPS Transit Time
If we are out of Stock, Click Here to Contact us
Manufacturer
Panasonic
Type
Multi Function
Rated Pressure Range
-29.5 to +29.5 inHg (-14.50 to +14.50 psi, -100.0 to +100.0 kPa)
Burst Rating
147.66 inHg (72.52 psi, 500 kPa)
Outputs
2x NPN, 1x Analog (1~5V)
Output Operation
N.O./N.C. Selectable
Pressure Ports
M5 female + 1/8" NPT male Thread
Display
Yes
Body Size
30Wx30Hx42.5D
Supply Voltage (DC)
12~24 V
Applicable Fluid
Non-corrosive gas
Selectable Display Unit
kPa, kgf/cm², bar, psi, mmHg, inHg
Response Time
2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms, selectable by key operation
Housing Material
Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure Port: Nickel-plated Brass
Vibration Resistance
10~500Hz
Ambient Temperature Range
-10 to +50 ºC
Protection Standard
IP40 (IEC)
Miscellaneous Information
CN-14A-C2 (connector attached cable, 2m) supplied with sensor
Suggested Accessories
MS-DP1-1 , MS-DP Brackets for Pressure Sensors ($2.80) MS-DP1-2 , MS-DP Brackets for Pressure Sensors ($4.50) MS-DP1-3 , MS-DP Brackets for Pressure Sensors ($2.70)
